Description
01 / In the tank
Wash film without unloading the reel.

After draining the fixer, leave the film on the reel. Insert the wash tube into the center opening of a compatible developing tank. Fresh water runs into the tank and drains over the top into your sink.
The tube is designed to draw air into the incoming water. Follow the wash time and temperature in the instructions for your film and chemistry.
02 / At the sink
Check your faucet connection.
The 1 m hose connects the wash tube to a matching faucet outlet. The brass fittings are a quick-connect style commonly used with washing machines in China. Pull back the collar, seat the fitting on the outlet, then release the collar to lock it in place.

03 / In the box
What comes with the EDL-WT.

- Wash tube
- 1 × ABS tube
194 × 21.8 × 21.8 mm - Hose
- 1 × 1 m hose
- Fittings
- 2 × brass quick-connect fittings
Developing tank, reels and faucet-side adapter are not included.
04 / FAQ
Before the first wash.
Will it fit my developing tank?
The EDL-WT fits JOBO 2500-series and Elevanfilm EDL-DT 2-series developing tanks.
What if my faucet has no quick-connect outlet?
You’ll need a faucet-side adapter that fits both your faucet and the kit’s brass quick-connect fitting. The two fittings in the kit are for the hose; they are not faucet adapters.
How much wash time can the EDL-WT save?
In one in-house test, the wash indicator showed no color change after 1 minute with the EDL-WT. Washing by hand reached the same result after 3 minutes with three water changes. The EDL-WT saved about 2 minutes in that test. This is not a recommended wash time; follow the wash instructions for your film and chemistry.
How long should I wash my film?
Follow the wash instructions for your film, chemistry and process. If your process calls for a separate final rinse or wetting-agent bath, do that after the wash.









There are no reviews yet.