Description
EFL Lensbox · Elevanfilm
A place for the lens you love.
EFL Lensbox pairs a solid-wood base with a clear acrylic cover and a mount-specific adapter, giving a favorite lens a dust-cover display between rolls.
$37–$47
Choose basswood or Jichimu, with a standard or mirrored display panel. Shipping is set separately by the store.
Choose your Lensbox
Four finishes, each with its own grain
Choose pale basswood or darker Jichimu. Each is available with a standard base panel or a mirrored panel that reflects the underside of the lens.
Basswood · Standard
Light natural wood, without the mirror panel.
Basswood · Mirror
Light natural wood with a mirrored display panel.
Jichimu · Standard
Deep-toned wood, without the mirror panel.
Jichimu · Mirror
Deep-toned wood with a mirrored display panel.
Natural wood varies. Grain, tone, and small marks formed as the wood grew will differ from one base to another.
A clear view, with a little protection
Made to be looked at
Keep the details in view.
The clear PMMA cover shows the lens from every side while helping keep everyday dust off it. A locking screw and L-shaped hex key are included with the display stand.
Choose the mirrored panel to see more of the lens from above, including details that are easy to miss when it is standing upright.
A mount-specific adapter
Set the lens upright without changing its mount.
Select an adapter for your lens mount. The adapter supports the lens at its mount, so the lens can stand upright for display without a permanent modification.
Check the lens dimensions below before ordering. The camera lens shown in the photographs is not included.
A tidy display
Designed to stack.
Locating grooves in the feet help align stacked cases, making it easier to arrange a small collection on a shelf or in a cabinet.
The natural wood base adds a warm note to a darkroom shelf, studio desk, or camera cabinet.
Check the mount and dimensions
Choose an adapter that matches your lens.
Standard camera-lens adapters
Select one of the listed mount adapters when ordering:
- Nikon F
- Canon EF
- Leica M
- Leica R
- Minolta MD
- Canon FD
- Pentax K
- Olympus OM
- Sony E
- M42
- Micro Four Thirds (M43)
- L39 / Leica thread
Size limit: the lens body must extend no more than 70 mm beyond its mount. This is a physical length limit, not a focal-length limit.
Linhof lens-board adapter
The Linhof adapter is for selected 4×5 lenses with Copal No. 0 or No. 1 shutters. The source specification covers common 100–180 mm lenses with a barrel diameter under 60 mm and total length under 70 mm.
Please check your individual lens dimensions before choosing this adapter. Compatibility depends on the lens and shutter fitting within these limits.
Not sure? Compare your lens with the measurements above before placing an order.
A discreet place for silica gel
Passive humidity control
Keep desiccant close at hand.
A compartment in the base holds up to five silica-gel sachets at a time. Ten reusable, color-indicating sachets are included, so you can keep a spare set ready while the others dry.
Check the indicator periodically and dry or replace the sachets according to the supplier’s instructions.
A note on humidity: Lensbox is not airtight. Silica gel provides passive humidity control, and the conditions inside depend on the surrounding environment and the condition of the sachets. The case cannot guarantee protection against lens fungus.
Personalization
Add a small engraved lens ID.
Optional mirrored identification plaque
A separate mirror-finish plaque can be laser-engraved with a lens model or short message.
At a glance
Specifications and what’s included.
Specifications
| Overall dimensions | 125 × 125 × 115 mm |
|---|---|
| Weight | Approximately 435 g |
| Wood options | Basswood or Jichimu |
| Other materials | PMMA, PETG, stainless steel |
| Cover | Clear acrylic (PMMA) |
| Mirror panel | Optional finish |
| Desiccant compartment | Holds up to five sachets at a time |
| Included desiccant | Ten reusable color-indicating sachets |
| Personalization | Optional engraved mirror ID plaque, +$3 |
What’s in the box
- One Lensbox display case in the selected wood and panel finish
- One lens-mount or Linhof lens-board adapter in the selected format
- Securing screw and L-shaped hex key
- Ten reusable color-indicating silica-gel sachets
Lens and camera are not included. They are shown for display purposes only.
Before you choose
A few useful details.
Will any lens fit?
No. Choose the adapter that matches your lens mount, then check the length limit. Standard lenses must extend no more than 70 mm beyond the mount. The Linhof adapter has additional shutter, diameter, and length limits.
Does Lensbox seal out moisture?
No. The clear cover is not airtight. The base holds silica gel for passive humidity control, but results vary with room conditions and sachet condition. It cannot guarantee protection from fungus.
Are the lens and camera included?
No. The camera and lenses in the product photographs are examples and are not part of the Lensbox package.
Will the wood grain match the photographs exactly?
No. Each base is made from natural wood, so grain, tone, and small natural markings vary from piece to piece.
There are no reviews yet.